PoE Lighting Controls | Sensors, Wall Switches & Dry Contact

Our Solutions

GENISYS PoE Lighting Controls

Fixtures make the light. Controls make it smart. GENISYS sensors, wall switches, and dry contact modules ride the same Ethernet as everything else, so occupancy, daylight, fingertips, and third-party devices all speak the same language.

Sensor · Wall switch · Dry contact

GENISYS PoE multi-function occupancy sensor face-on with PIR Fresnel lens and spring mounting clips

Multi-Function Sensor

One sensor to rule them all

Occupancy. Vacancy. Light levels. Automated daylight harvesting that dims with the sun. Pair it with GENISYS software and the real-world applications really shine.

Walk in carrying a heavy box and the lights are already on. Warehouse aisles only burn energy where you are. Daylit cubicles dim themselves and let the sun take over. Hallways fade behind you. Your office wakes up and ColorTunes to match the day. Futuristic? Sure. Available today? Also sure.

Occupancy and vacancy detection
Ambient light level sensing
Automated daylight harvesting
Standalone PoE device, not locked inside a fixture

Power: PoE over Ethernet
Sensing: Occupancy, vacancy, light level
Daylight: Automated harvesting

Uncommon sensing

Why we keep sensors free of the fixture

Better coverage

A sensor works harder when it is not stuck to a large fixture. Place it where people actually walk and where daylight actually lands.

Easy to move

Need a new location? Reposition the sensor. With fixture-integrated systems, that often means moving the light too.

Same PoE simplicity

Powered and controlled on Ethernet like every other GENISYS node: safe to install, IoT-ready, and network-native.

Energy that follows people

Productive spaces, fewer empty-room watts. Multi-function sensing helps drive lighting energy costs down, dramatically.

Sensor details

RJ45 ports, spring clips, and mounting hardware

A compact PoE occupancy sensor built for ceiling installs and networked lighting control.

Back of GENISYS PoE occupancy sensor showing dual RJ45 ports and UL listing label

GENISYS PoE occupancy sensor with mounting nut, spring clips, and install hardware

Wall Switch

Uh oh. Your definition of a wall switch is about to go bye-bye.

Pop a normal switch off the wall and fiddle with the wires behind it, and bad things can happen. Pry a GENISYS switch out of its housing and you will find CAT5 or CAT6. Fiddle all you want. Nobody is getting electrocuted.

Safe is only the start. Because GENISYS is networked, physical location does not matter. Remap what a switch controls in software: add fixtures, drop fixtures, or point it at a whole zone with a couple of clicks.

Low-voltage Ethernet behind the plate, not line voltage
On, off, dim, and then some
Drive RGB color or ColorTune white from the wall
Cycle intensity, color, CCT, or scenes in software

Wiring: CAT5 / CAT6
Control: Intensity, RGB, ColorTune, scenes
Remap: Software presets anytime

GENISYS PoE wall switch back with dual RJ45 Ethernet ports

Still just a switch?

Wrong. On, off, and dim is only the opening act.

GENISYS has a whole suite of features outside the normal lighting playbook, and the wall switch can run them. Change RGB color from the plate. Nudge ColorTune warmer or cooler. Activate a preset scene. With software, the same switch can cycle from intensity to color to CCT without rewiring a thing.

More capability is always on the way, including richer lighting functions and maybe, just maybe, a few HVAC tricks.

Wall switch details

Clean faceplate. Simple Ethernet behind it.

A familiar wall plate on the front, dual RJ45 ports and a mounting bracket on the back.

GENISYS PoE wall switch front angle with green LED level indicator

GENISYS PoE wall switch back with RJ45 ports and black mounting bracket

Dry Contact Interface Module

Input. Output. Same little box.

The Dry Contact Interface Module is an optional GENISYS accessory with outsized capabilities. It is a control-port device managed over the network through the IntelliDrive and GENISYS software suite.

Bring in third-party wall switches, foot switches, pressure mats, and the like. The kicker: it can act as an input and an output at the same time. On the output side, drive a relay for AC-powered lights or other AC devices when the project calls for it.

Third-party switches, mats, and similar inputs
Simultaneous input and output operation
Relay control for AC-powered devices
Networked through IntelliDrive and GENISYS software

Input: 5.0 Vdc
Output: 5V, 0.5 Adc max
Compliance: UL Listed

Sensor: Occupancy, vacancy, daylight
Wall switch: Networked, software-remappable
Dry contact: Input and output capable
Connection: Ethernet / PoE ecosystem
Platform: IntelliDrive + GENISYS software

Explore more of the GENISYS system

GENISYS IntelliDrive

The PoE lighting hub that powers and controls up to eight devices.

Learn more

PoE lighting software

Centralized scenes, schedules, zoning, and reporting.

Learn more

PoE lighting fixtures

Network-ready LED luminaires designed for GENISYS systems.

Learn more

Third party devices

Bring approved switches and specialty fixtures into the system.

Learn more

Want to take the plunge with GENISYS PoE Lighting Systems?

Overwhelmed? Already have a handle on PoE? Whatever side of the spectrum you’re on, call or message us and we’ll help clear up any lingering curiosity you may have about GENISYS. The Magic Number: 515-777-7444

Get in touch